Specifications:
Wireless CDMA 800MHz Mobile Phone Signal Amplifier RF Repeater |
|
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, indoor and outdoor antennas and no interference. It could also improve indoor electromagnetism environments, |
|
Introduction To Mobile Phone Signal Repeater |
|
Repeater |
1. Enhance Mobile Phone Signal Strength |
2. Improve Communication Quality |
|
3. Reduce Cellphone Radiation |
|
4. Protract Cellular Battery Life |
|
5. Economic Building Cost |
|
6. Easy Operation |
|
7. Easy Installation |
|
The device featured by easy installation and operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones. |
|
2. Features |
|
High gain, easy installation and operation. |
|
Full-duplex, single-port design, build-in power supply. |
|
Use ALC technology, adjust extent automatically |
|
LED Light Working and Signal Condition Indicators |
|
Big linear power, control inter modulation and scatteration stably |
|
Dependability stand by GB6993-86 standard |
|
CE Approved |
|
Technique Specifications
Item |
Specification |
|
Up Link |
Down Link |
|
Frequency |
825-835MHz |
870-880MHz |
Power |
-70~-40dBm |
|
Gain |
65dB |
70dB |
Max Output Power |
+20dBm / Total power |
+20dBm / Total power |
Impedance |
50 |
|
Seclusion |
>70dB |
|
Power Supply |
AC110/220V(used AC/DC Adapter 12Vdc) |
|
Compact Design |
Indoor Use |
|
Item Dimension |
200x140x40mm |
|
Outdoor Hanging Antenna |
Working frequency | 800-2500MHz |
| gain (dB) | Uplink 7DB | |
| Impedance | 50ohm/N | |
| Circumstance Temperature | -10 C~60 C | |
| Dimension | 210mmX180mmX40mm; | |
| Max power | 50W | |
| Connector type | N-female | |
| S.W.R | 1:1.3 | |
| Weight | 0.7kg | |
| Colour | White |
More Features:
Introduction for repeater:
- Fix up outdoor antenna reception on housetop and point to signal tower.
- Connect outdoor antenna to "BTS" port in repeater machine through cable.
- Connect indoor antenna(s) to "MS" port in repeater machine through cable also.
- Plug power adaptor into AC power socket and finish installation.
Technique Supporting
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
- If can not call out, please adjust the direction of outdoor antenna.
- If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20 meters at least, with a wall between and not in a same horizontal line.



Package:
- 1 x outdoor hanging antenna
- 1 x Indoor antenna use board or rooftop antenna
- 2 x signal wire use coaxial-cable.

