Select Your Currency
My Cart
You have no items
in your shopping cart.
Compare Products
You have no items to compare.
This optical fiber transmitter and receiver kit adopts the most advanced digital video and fiber high speed transmission technology, it can transmit video, data simultaneously without distortion via fiber. It adopts all digital video no compression transmit technology, supports any high resolution dynamic or stable picture transmission, and can transmit in very high quality video picture. This product can be widely used on any large surveillance project, ITS (Intelligent transport system) and community safer guard system.
Specifications:
Video |
|
Video Input |
1 volt pk-pk (75 ohm) |
Video Input / Output Channels |
1 |
Video Format |
PAL / NTSC / SECAM auto-compatible |
Bandwidth |
8 MHz |
Bit Resolution |
8-bit |
Differential Gain |
< 1% (typical) |
Differential Phase |
< 0.6 |
Field Tilted |
<1% |
Weighted Signal to Noise Ratio |
> 68dB (typical) |
Data |
|
Data Channel |
1CH Reverse Data |
Data Protocols |
RS-485 |
Total Sampling Rate |
2MHz |
Data Rate |
0 to 300Kbps |
Bit Error Rate |
≤10-9 |
Optical |
|
Optical Emitter |
Laser Diode |
Number of Fibers |
1 |
Wavelength |
Default 1310nm,1550nm Optional |
Fiber |
Default Single-mode, Multi-mode Optional |
Transmission Distance |
Single-mode: 20km(12.4 miles); |
Connectors |
|
Optical Connector |
FC |
Video Connector |
BNC |
Data Connector |
Phoenix Terminal (Industrial Terminal) |
Other |
|
Power Supply |
DC 5V @ 1A |
Operating Temp |
-30C to +70C |
Relative Humidity |
0% to 95% (no condensing) |
Fiber Optic Technical Parameters:
Fiber Type |
Multi Mode |
Single Mode |
||||
Wavelength (nm) |
850/1310 |
1310/1300 |
1550 |
|||
Type of Fiber Interface |
FC |
FC |
FC |
|||
Transmission Distance (km) |
0 to 2 |
0 to 20 |
0 to 40 |
0 to 60 |
0 to 80 |
15 to 120 |
Transmission Power (dBm) |
-14 to -18.5 |
-7 to -16 |
-9 to -4 |
-4 to 0 |
+1 to -8 |
-5 to 0 |
Receiving Sensitivity (dBm) |
-31 |
-29 |
-32 |
-32 |
-34 |
-35 |
Optical Saturation (dB) |
-14 |
-8 |
-3 |
-3 |
-3 |
-3 |
Optical Loss (dBm/km) |
2.5 |
0.4 |
0.4 |
0.4 |
0.25 |
0.25 |
More Features:
Selling Points:- Support broadcast quality transmission of 8-bit digitally encoded video over one multimode or single-modeoptical fiber.
- Using APC circuit, invariable optical output power, and increasing dynamic range.
- High anti-interference ability, high transmission quality, high security.
- No EMI (Electromagnetic Interference), no RFI (Radio Frequency Interference), and no ground current.
- LED indicators are provided to real-time monitor the system operating status (power supply, optical fiber link, video signal and data traffic).
- Use optical power adaptive technology, Plug and Play, ease install, free debug.
- Protection from lightning surge.
- Support 1CH video and 1CH data transmission;
- Support simultaneous transmission of video and data signal;
- 8MHz video bandwidth, compatible with NTSC, PAL and SECAM video systems;
- Support 1 channel reverse data, compatible with RS-485;
- Transmission distance up to 20km (12.4 miles) without repeater;
- MTBF(Mean Time Between Failure)>100,000 hours;
Package:
- 1X 1CH Video 1CH Data Optical Transmitter
- 1X 1CH Video 1CH Data Optical Receiver
- 2X Power Adapter
- 1X Manual
