Select Your Currency
My Cart
You have no items
in your shopping cart.
Compare Products
You have no items to compare.
Related Products
Check items to add to the cart or select all
-
GSM 1900MHz Wireless Mobile Phone Signal Amplifier RF Repeater 1000㎡
Regular Price: $454.99
Special Price: $409.99
-
GSM 2100MHz 3G Wireless Mobile Phone Signal Amplifier RF Repeater
Regular Price: $414.99
Special Price: $373.99
-
Super Power GSM900MHz Wireless Cell Phone Signal Amplifier RF Repeater
Regular Price: $414.99
Special Price: $373.99
-
GSM 1800MHz Mobile Phone Signal Amplifier RF Repeater 200M Square
Regular Price: $442.99
Special Price: $349.99
-
GSM 900/2100MHz Wireless 3G Mobile Phone Signal Amplifier RF Repeater
Regular Price: $794.99
Special Price: $599.99
Specifications:
| Item | Specification | ||
| Up Link | Down Link | ||
| Frequency | 1710-1785MHz | 1805-1880MHz | |
| Power | -70~-40dBm/FA(1.23MHz) | ||
| Gain | 60dB±3DB | 65dB±3DB | |
| Max Output Power | 17dBm / ±3DBM Total power | 17dBm / ±3DBM Total power | |
| Impedance | 50ohm | ||
| lag time | ≤0.5μs | ||
| noise coefficient 09 | ≤4dB | ||
| Seclusion | >70dB | ||
| coverage area | More than 1000 Square Meter | ||
| Power Supply | AC110/220V(used AC/DC Adapter 12Vdc) | ||
| Compact Design | Indoor Use | ||
| Item Dimension | 195x150x25mm | ||
Inhale |
Working frequency |
800~2500MHz |
|
gain( dB) |
Uplink 3DB |
||
Impedance |
50ohm/N |
||
Circumstance Temperature |
-10C～60C |
||
Dimension |
Dia 170x120 mm; |
||
Max power |
50W |
||
Connector type |
N- |
||
S.W.R |
1:1.3 |
||
Weight |
0.29kg |
||
Colour |
White |
||
Outdoor Hanging Antenna |
Working frequency | 800-2500MHz |
| gain( dB) | Uplink 7DB | |
| Impedance | 50ohm/N | |
| Circumstance Temperature | -10C～60C | |
| Dimension | 210mmX190mmX70mm; | |
| Max power | 50W | |
| Connector type | N-female | |
| S.W.R | 1:1.3 | |
| Weight | 0.7kg | |
| Colour | White |
More Features:
- High gain, easy installation and operation.
- Full-duplex, single-port design.
- Use ALC technology, adjust extent automatically
- LED Light Working and Signal Condition Indicators
- Big linear power, control inter modulation and scatteration stably
- Dependability stand by GB6993-86 standard
- Compatibility of electromagnetism according with ETS300 609-4
- CE and RoHS Approved
- Enhance Mobile Phone Signal Strength
- Improve Communication Quality
- Reduce Cell phone Radiation
- Protract Cellular Battery Life
- Economic Building Cost
Introduction for repeater:
- Fix up outdoor antenna reception on housetop and point to signal tower.
- Connect outdoor antenna to ''outdoor'' port in repeater machine through cable.
- Connect indoor antenna(s) to ''indoor'' port in repeater machine through cable also.
- Plug power adaptor into AC power socket and finish installation.
Technique Supporting
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
- If cannot call out, please adjust the direction of outdoor antenna.
- If strength is not steady，please check if outdoor and indoor antenna are too close. Please ensure the outdoor and indoor antenna have distance of 20meters at least ,with a wall between and net a same horizontal line
Note:
- The distance between the outdoor antenna and the amplifier is not more than 30 meters
- The outdoor Antenna is not supposed close to a large antenna, high-voltage lines, transformers, or metal mesh, etc.
- The distance between the indoor antenna and the amplifier is not more than 40 meters
- The indoor antennas do not close to the wall as far as possible in order to increase the coverage area
- The indoor antenna and the outdoor antenna are advised to stay away from each other for more than the distance as one floor to prevent the signal has been cyclic amplification
- If the quality of call is not good，change the installation position of the outdoor antenna and adjustment the indicate direction of antenna.
- It is best to enclose waterproof tape at the junction, and prevent moisture narrow the indoor signal coverage area
- The cable try to walk a straight line, do not bend more than 90 Deg
Dimension:
- Amplifier Package: GW 1665g; 275mmX195mmX75mm
- Amplifier: NW 1177g; 195mmX150mmX25mm
- Power Adaptor: 275g; 105mmX45mmX33mm
- Input cable: 1500mm
- Output cable: 1500mm
- Outdoor Antenna: GW with package: 700g; NW: 426g; 210mmX180mmX40mm
- Inhale top antenna: GW with package: 287g; NW: 213g D170mm X H120mm
- Cable: 100g/meter (By default, we ship out two 5m cables)
Additional item price:
- The cable length can be customized according to customer needs, USD $6/m (6 dollar per meter)
- You can order more indoor top antennas to facilitate multi-floor users, 30 dollars per each.
- The repeater only (without antennas and cables) cost you $420 dollars.
Note:
- Cable length self-defining, please contact seller if you need longer cable
Package:
- 1X Repeater
- 1X Power adaptor
- 1X Outdoor hanging antenna
- 1X Indoor ceiling antenna
- 2X 5m cables
