Select Your Currency
My Cart
You have no items
in your shopping cart.
Compare Products
You have no items to compare.
Related Products
Check items to add to the cart or select all
-
Mobile Cell Phone Signal Amplifier Repeater GSM 900MHZ
Regular Price: $139.99
Special Price: $125.99
-
GSM 900MHZ Signal Amplifier Repeater for Mobile Phone
Regular Price: $236.99
Special Price: $213.99
-
CDMA 800MHz GSM900MHz Wireless Mobile Phone Signal Amplifier Repeater
Regular Price: $736.99
Special Price: $663.99
Specifications:
Wireless GSM 1900MHz Mobile Phone Signal Amplifier RF Repeater |
|
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation and operation, indoor and outdoor antennas and no interference. It could also improve indoor electromagnetism environments, |
|
Introduction To Mobile Phone Signal Repeater |
|
Repeater |
1. Enhance Mobile Phone Signal Strength |
2. Improve Communication Quality |
|
3. Reduce Cell phone Radiation |
|
4. Protract Cellular Battery Life |
|
5. Economic Building Cost |
|
6. Easy Operation |
|
7. Easy Installation |
|
The device featured by easy installation and operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cell phones. |
|
Features |
High gain, easy installation and operation |
Full-duplex, single-port design |
Use ALC technology, adjust extent automatically |
LED Light Working and Signal Condition Indicators |
Big linear power, control inter modulation and saturation stably |
Dependability stand by GB6993-86 standard |
Compatibility of electromagnetism according with ETS300 609-4 |
CE and ROHS Approved |
Technique Specifications
Item |
Specification |
||
Up Link |
Down Link |
||
Frequency |
1850-1910MHz |
1930-1990MHz |
|
Power |
-70~-40dBm/FA (1.23MHz) |
||
Gain |
60dB±3DB |
65dB±3DB |
|
Max Output Power |
17dBm / ±3DBM Total power |
17dBm / ±3DBM Total power |
|
Impedance |
50OHM |
||
lag time |
≤0.5μs |
||
noise coefficient |
≤4dB |
||
Seclusion |
>70dB |
||
coverage area |
More than 1000㎡ |
||
Power Supply |
AC110/220V (used AC/DC Adapter 12Vdc) |
||
Compact Design |
Indoor Use |
||
Item Dimension |
240 x 175 x 30 mm |
||
Inhale top antenna |
Working frequency |
800~2500MHz |
|
gain ( dB) |
Uplink 3DB |
||
Impedance |
50Ohm/N |
||
Circumstance Temperature |
-10C ～ 60C |
||
Dimension |
Dia 170×120 mm; |
||
Max power |
50W |
||
Connector type |
N- |
||
S.W.R |
1:1.3 |
||
Weight |
0.29kg |
||
Color |
White |
||
outdoor Hanging Antenna |
Working frequency |
800-2500MHz |
gain( dB) |
Uplink 7DB |
|
Impedance |
50OHM/N |
|
Circumstance Temperature |
-10C ～ 60C |
|
Dimension |
210mm X 190mm X 70mm; |
|
Max power |
50W |
|
Connector type |
N-female |
|
S.W.R |
1:1.3 |
|
Weight |
0.7kg |
|
Color |
White |
More Features:
Installation Approaches
- Fix up outdoor antenna reception on housetop and point to signal tower.
- Connect outdoor antenna to ''outdoor'' port in repeater machine through cable.
- Connect indoor antenna(s) to ''indoor'' port in repeater machine through cable also.
- Plug power adaptor into AC power socket and finish installation.
Technique Supporting
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
- If cannot call out, please adjust the direction of outdoor antenna.
- If strength is not steady，please check if outdoor and indoor antenna are too close. Please ensure the outdoor and indoor antenna have distance of 20 meters at least ,with a wall between and at the same horizontal line
Note:
- The distance between the outdoor antenna and the amplifier should not be more than 30 meters
- The outdoor Antenna not close to a large antenna, high-voltage lines, transformers, or metal mesh, etc.
- The distance between the indoor antenna and the amplifier is not more than 40 meters
- Do not close the indoor antennas to the wall in order to maximum the coverage area
- The indoor antenna and the outdoor antenna are advised to stay away from each other for at least one floor to prevent the signal been cyclic amplified.
- If the quality of call is not good, change the installation position of the outdoor antenna and adjustment the indicate direction of antenna.
- At the junction, it is best to wrap the connector to prevent decreasing the indoor signal coverage area from moisture.
- The cable try to walk a straight line, do not bend more than 90Deg
Packing size:
- Amplifier with package: G.W 1700g
- Amplifier: N.W 1100g
- Power adapter: 275g
- Outdoor antenna: G.W: 700g (with package) N.W: 426g Size: 210mm X 180mm X 40mm
- Indoor ceiling antenna: G.W: 287g (with package); N.W: 213g Dia 170mm X 120mm (H)
- Cable: 100g/meter (We will ship out 2 pcs of 5-meter cables by default)
- Cable length per client’s request and charges USD6/Meter
- Indoor ceiling antenna is available to buy more at once and charges USD30/PC
- Amplifier only (without antenna and cable): USD279.5
Note:
- Cable length self-defining, please contact seller if you need longer cable
Package:
- 1 X 1000㎡Wireless GSM 1900MHz Mobile Phone Signal Amplifier RF Repeater
- 1 X Power adaptor
- 1 X Outdoor hanging antenna
- 1 X Indoor ceiling antenna
- 2 X 5M cable
